Filter
Top Products
ISDN Features
Primary Rate Interface (PRI), Answering Calls
Aspire ISDN PRI Manual ◆ 15
Programming (Cont’d)
Should all PRI
Trunks ring the same
extensions?
In 22-02-01, enter 3.
Refer to the
Aspire Software
Manual for DID
programming.
In 22-02-01, enter 0. Yes No
In 22-05-01, assign all the trunks on a
PRI PCB to the same Ring Group.
In 14-07-01 and 15-06-01, set up the trunk
Access Maps for PRI trunks.
Should extension
ring for incoming
calls on PRI trunk?
In 22-04-01, assign extension
to PRI trunk's Ring Group.
In 22-04-01, do not
assign extension to PRI
trunk's Ring Group.
YesNo
In 14-01-01, assign names to trunks to
make identification easier.
Do you want
unanswered PRI
calls to reroute if
unanswered?
In 22-01-04,
enter 0.
In 22-01-04, enter
the DIL No Answer
Time (>0).
In 22-08-01, enter the no-
answer Ring Group for
unanswered PRI calls.
Continued on
the following
page.
RerouteDo not reroute
For each extension in the Ring
Group, in 22-06-01, enter '1' for
each time mode when the
extension should ring.
Continued from the
previous page.
In 22-04-01, assign extension
to PRI trunk's Ring No
Answer Ring Group.
For each extension in the Ring
Group, in 22-06-01, enter '1' for
each time mode when the
extension should ring.