Filter
Top Products
Program 14 : Trunk, Basic Setup
14-01 : Basic Trunk Data Setup
Aspire ISDN PRI Manual ◆ 61
Program 14 : Trunk, Basic Setup
14-01 : Basic Trunk Data Setup
Description
Use Program 14-01 : Basic Trunk Data Setup to set the basic options for each trunk port. Refer
to the chart below for a description of each option, its range and default setting.
Input Data
Level:
Aspire S Aspire
IN •Available. • Available.
Trunk port number 1-200
Item
No.
Item Input Data Default
Related
Program
01 Trunk Name
Set the names for trunks. The trunk name
displays at display keysets for incoming
and outgoing calls.
Up to 12 characters 1 = Line 001
|
Line 200 = Line 200
02 Transmit CODEC Gain Type
Use this option to select the CODEC gain
for the trunk. The option sets the amount
of gain (signal amplification) for the trunk
you are programming.
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
32 (0dB)
03 Receive CODEC Gain Type
Use this option to select the CODEC gain
for the trunk. The option sets the amount
of gain (signal amplification) for the trunk
you are programming.
1~63
(-15.5 ~ +15.5dB in
.5dB intervals)
32 (0dB)
07 Outgoing Calls
Use this option to allow/prevent outgoing
calls on the trunk you are programming.
0 = prevented
1 = allowed
1
10 DTMF Tones for Outgoing Calls
Use this option to enable (1) or disable (0)
DTMF tones for outgoing trunk calls.
0 = disable
1 = enable
0