ISDN Features
Primary Rate Interface (PRI), Placing Calls
26 ◆ Aspire ISDN PRI Manual
Programming (Cont’d)
Continued
from
previous
page.
Continued
on next
page.
Do you need to restrict certain
extensions from placing calls on
certain trunks?
Build an outgoing restriction matrix.
In 14-07-01 for each
Access Map, select
the access options
for each trunk.
In 15-06-01, assign
extensions to
Access Maps.
In the default program,
extensions have full
access to all trunks.
Yes
No
In 1005, assign
Class of Service to
extensions.
Are outgoing
calls allowed on
specific trunks?
In 14-01-07, enter 1 to
allow outgoing calls.
In 14-01-07, enter 0 to
prevent outgoing calls.
YesNo
In 14-05-01 assign PRI trunks to trunk groups
(This determines available channels for PRI
trunks).
Should telco display the calling
number's sub-address?
In 20-09-03, enter 1 to
enable sub-address
display by telco.
Yes
In 20-09-03, enter 0 to
disable sub-address
display by telco.
No
In 21-12-01, program the calling party number
data (15 digits max.) for each trunk.
In 21-13-01, program the calling party number
data (15 digits max.) for each extension.
Should Caller ID be included in
the call's setup message?
In 15-01-04, enter 1.
In 10-03-05 enter 1.
Yes
In 15-01-04, enter 0.
In 10-03-05 enter 0.
No