Filter
Top Products
Program 15 : Extension, Basic Setup
15-07 : Programmable Function Keys
74 ◆ Aspire ISDN PRI Manual
[2] Appearance Function Level (*00 - *99) (Service Code 852)
Conditions
When a key is programmed using service code 852, that key cannot be programmed with a function
using the 851 code until the key is undefined (000). For example with a Park Key programmed by
dialing 852 + *04 must be undefined by dialing 852 + 000 before it can be programmed as a Voice
Over key by dialing 851 + 48.
Feature Cross Reference
Refer to chart above.
Telephone Programming Instructions
To enter data for Program 15-07 (Programmable Function Keys):
1. Enter the programming mode.
2. 15 07
3. Enter the number of the item you want to program.
4. Select the telephone number to be programmed by pressing the FLASH or the VOLUME ▲
or VOLUME ▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
Function
Number
Function Additional Data LED Indication
*00 Not Used
*01 Trunk Key Trunk Number (001-200)
*02 Trunk Group/Loop Key Trunk Group Number (001-100)
*05 Loop Keys • 0=Incoming + Trunk Group
Number (001-100)
• 1=Outgoing + Trunk Group
Number (001-100)
• 2=Both + Trunk Group
Number (001-100)
15-07-01 TEL301
KY01 = *01
back
↑↑
↑↑
↓↓
↓↓
select
15-07-nn TELnnn
nnnnn
←←
←←
→→
→→