ISDN Features
Primary Rate Interface (PRI), Placing Calls
28 ◆ Aspire ISDN PRI Manual
Programming (Cont’d)
Stop
Continued
from
previous
page.
Do you want to set up
an Alternate Trunk
Route Access Code ?
Stop
In 11-01-01, set up a
Service Code for
Alternate Trunk Route
Access.
For example, to make
50 the Alternate Trunk
Route Access Code:
DIAL = 5
Digit = 2
Kind = 8
In 11-09-02, assign the
Service Code set up in the
previous step for Alternate
Trunk Route Access.
Should extension
be able to use
Alternate Trunk
Route Access?
In 21-15-01, enter the
extension number
and enter 0 to
prevent routing.
In 21-15-01, enter the
extension number and
enter the Trunk Group
Routing route number.
Is Trunk Group
Routing defined?
Refer to the Trunk
Group Routing feature
and set up Trunk
Group Routing.
No Yes
NoYes
No
Yes
Check the Analog Trunk Timers in 81-01
for compatibility with the telco.
If desired, assign names to trunks in
14-01-01.
Do you want to adjust
the gain (volume) for
trunks?
Adjust the CODEC Gain
in 14-01-02 (transmit)
and 14-01-03 (receive).
Trunks
No