Filter
Top Products
NDA-30115 Revision 1.0 Page 25
Property Management System - Communication Interface Message Descriptions
Wake Up/Group Announcement
These messages allow for the management of wake up calls and group
announcements. Both the Model 60 and the Model 90 version use these messages.
• Wake Up Setting (NEAX) -- This message is sent by the NEAX to notify the
PMS that a wake up call has been set.
• Wake Up Cancellation (NEAX) -- This message is sent by the NEAX to notify
the PMS that a wake up call has been cancelled.
• Wake Up Execution Result -- This message is sent by the NEAX to report the
results of the wake up call.
• Wake Up Setting(PMS) -- This message is sent by the PMS to set a wake up call.
• Wake Up Cancellation (PMS) -- This message is sent by the PMS to cancel a
wake up call.
• Group Announcement Setting (NEAX) -- This message is sent by the NEAX to
notify the PMS that a group announcement has been set.
• Group Announcement Cancellation (NEAX) -- This message is sent by the
NEAX to notify the PMS that a group announcement has been cancelled.
• Group Announcement Execution Result -- This message is sent by the NEAX
to report the results of a group announcement.
• Group Announcement Setting (PMS) -- This message is sent by the PMS to set
a group announcement.
• Group Announcement Cancellation (PMS) -- This message is sent by the PMS
to cancel a group announcement.
Room Move/Swap/Copy (Model 60)
These messages are used to transfer room information. All of these messages are
used exclusively for Model 60. The messages are:
• Room Move -- This takes the data for one room and moves it to another room.
This will leave the second extension’s maid status unchanged, cancels Room
Cut-Off and sets all other data to that of the first extension. The first extension’s
maid status is set to ‘1’, Room Cut-Off is set, Do Not Disturb and Message
Waiting is reset, Wake Up is cancelled, Language is set to “Undefined” and
Guest Name and Group Number are cleared.
• Room Swap -- This takes the data for one room and moves it to another room,
while taking the other room’s data and moving it to the first room.
• Room Copy -- This exactly copies the data for one room to another room
without changing the data for the first room. The PMS should take care to be
consistent in the manner in which this message is used. If the PMS sends a
Room Copy message after check in, it should send a Room Copy message after
check out.