Filter
Top Products
NDA-30115 Revision 1.0 Page 69
Property Management System - Communication Interface Message Formats
Room Status
Change
Figure 4-43 Room Status Change
If Room Status is set to ‘0’ and Cleaning Status is set to either ‘3’ or ‘4’, the room
data is cleared.
If Room Status is set to ‘0’ and the previous Room Status had been ‘1’ or ‘2’, Room
Cut-Off is set and the Group registration is cancelled as in the case of a Check Out.
Message fields are:
• Extension -- Extension number. If the extension number is less than six digits,
left justify the number and fill the remaining bytes with space (20H) characters.
• Room Status -- Room status. This flag is used in conjunction with the cleaning
status flag to determine the status of the room.
• Cleaning Status -- Cleaning status. The possible combinations with room status
are listed below:
‘6’‘1’‘1’‘3’‘3’ Extension
Room
Status
Cleaning
Status
01234 6 89 15
STX SA UA EI FTC MSC FC 6 1
02H ‘1’‘!’‘L’
03H xx
ETX BCC1
16 17 18
2
2
0
0
0
0
0
1
0
1
2
4
Stay, Departure Day
Stay, Departure Day, Cleaning in progress
Out (Checked Out)
Out, Cleaning in progress
Out, Cleaning ended
Out of Order (Cannot sell)
Room
0
1
1
Clean
3
0
1
Status of the Room
Vacant (Ready to sell)
Stay (Occupied)
Stay, Cleaning in progress
1
1
2
3
Stay, Cleaning ended
Stay, Inspected