Page 78 NDA-30115 Revision 1.0
Message Formats Property Management System - Communication Interface
Room Recovery (Model 90)
These messages are only used by the Model 90. When the PMS receives a Nop Test
Recover Answer (70-2) message, it sends one Room Data Report message for each
room. Prior to sending any recovery messages, however, a Recovery Start Report
(70-3) must first be sent. Recovery is concluded by sending a Recovery End Report
(70-4).
The Room Recovery messages use the following Function Codes:
• 57-1 -- Room Data Report
• 57-3 -- Guest Room Secretary Telephone
• 57-4 -- Connecting Room
• 57-5 -- Message Status Report
• 57-6 -- Wake Up
Room Data Report
Figure 4-50 Room Data Report
If Room Status is set to ‘0’ and Cleaning Status is set to either ‘3’ or ‘4’, the room
data is cleared.
The message fields are:
• Extension -- Extension number. If the extension number is less than six digits,
left justify the number and fill the remaining bytes with space (20H) characters.
• Group ID -- Group number for the extension. If the group number is less than
six digits, left justify the number and fill the remaining bytes with space (20H)
characters.
• Room Status -- Room status. This flag is used in conjunction with the cleaning
status flag to determine the status of the room.
‘5’‘7’‘4’‘6’‘1’ Extension Group ID
Key VIP Language
Display
Data BData A
Room
Status
01234 6 89 15 21
STXSAUAEIFTCMSCFC661
02H ‘1’‘!’‘L’
03H xx
ETX BCC
111116
22 23 24 25 26
42 45 50 51
35
Name
Cleaning
Status