Filter
Top Products
55
■ Changing Your Passcode
To change your passcode, proceed as follows:
1 Press the ADJUST button.
• The “Passcode?” screen will be displayed.
2 Enter the four digit current passcode using the “1” through “10”
buttons. Press ENTER.
• The “Adjustment” menu will be displayed.
3 Use the CURSOR or button to highlight the “8. Set
Option” menu. Press ENTER to display the “Set Option” menu.
4 Use the CURSOR or button to select “1. Passcode”. Press
ENTER to display the “Passcode Setting” menu.
5 Use the CURSOR or button to select “Entry”.
PressENTER to display the “Current Passcode?” menu.
6 Enter the four digit passcode (the current passcode) using the “1”
through “10” buttons.
1) Each time you press the INPUT button, an asterisk will
appear next to the “Current Passcode?” message.
2) Once you have finished entering the four digit passcode, press
ENTER.
NOTE: If you have made an error, press the NORMAL button
todelete the asterisk “*”. Then re-enter the correct passcode.
To delete all the entered digits, hold down the CTL button
then press the NORMAL button.
3) If the entered passcode is correct, the “New Passcode?”
screen will be displayed.
NOTE: If the passcode is not correct, the “Warning
Different Passcode!!” message is displayed. You will be
required to enter the correct current passcode.
-Adjustment-
1. Source Registry
2. Amplitude
3. White Balance
4. Signal Level
5. Uniformity
6. Display Function
7. Lamp Mode
8. Set Option
-Set Option-
1. Passcode
2. Setting Mode
3. Menu Mode
4. Execute Mode
Passcode
Passcode Setting
Entry Disable
Passcode
Passcode Setting
Current Passcode [ ]
✳✳✳✳
Passcode
PASSCODE SETTING
ENABLE DISABLE
Passcode Setting
New Passcode [ ]
✳✳✳✳
3.OPERATION