NEC XL-6500 Projector User Manual


 
79
Convergence limits : Within one pixel
Set-up signal : Gray bars signal , Cross hatch signal , Flat field ,
Black flat field, Contrast checker board, Small checker board, and Ramp
Power supply : AC 200V - 240V
Power consumption : 2.4KW ( MAX)
Input current : 13.0 A(MAX)
Safety and regulation
UL : Meet UL 1950
CSA : Meet CSA 950
FCC : Meet FCC class A
DHHS : Approved
DOC : Meet
Meet EMC Directive
EN55022 : Meet(Radiation)
EN55082-2 : Meet(Immunity)
EN61000-3-2, EN61000-3-3 : Meet(Disturbance)
Meet LVP Directive
EN60950 :Meet (Safety)
Cabinet dimension : 29.5" (W) x 39.4" (D) x 15" (H) without lens
750 mm (W) x 1000 mm (D) x 380 mm (H) without lens
Weight : 238 lbs (108 kg)
Remote controller : Wired application
Wireless (operating distance 23 ft./7m)
External control : Input select ;
Power On/OFF
Mute
PC control : Supports
RS-232C / RS-422 switchable
ISS-6020 Compatibility : Full compatible
OSD Output terminal : D-sub shrink 15 Pin
RGB signal : 0.7Vp-p Analog out ( 75ohm )
H,V sync out : TTL
Accessory (Option) : Input terminal Option
Environment : Temperature 10 to 40 degrees C
: Humidity 20 to 90% non-condensing
: Storage -10 to 50 degrees C
Lamp life : 1500 Hours ( Half light output point )
Noise : 59 dB
Note: Specifications are subject to change without notice.
G sync : 0.3-0.6Vp-p 75ohm
Sync. Negative(BNC)
Video : 1.0Vp-p 75ohm Sync. Negative
S-Video : Y 1.0Vp-p 75ohm Sync. Negative
C0.28Vp-p 75ohm(burst level)
(3 mode acceptable)
Y, Cr, Cb : Y 1.0Vp-p 75ohm Sync. Negative
Cr,Cb 0.7Vp-p 75ohm ( Y,Pb,Pr )
Video System : NTSC,PAL,SECAM,4.43NTSC