NEC XL-6500 Projector User Manual


 
75
Others
Test Patterns
Test Pattern
Off
Flat Field
Ramp
Contrast Checkerboard
Cross Hatch
Gray Bars
Small Checkerboard
Black Flat Field
This projector will generate a selection of test signals.
Seven kinds of internal test patterns can be selected from the Test
Pattern menu.
To display the Test Pattern menu, proceed as follows:
1. Press the TEST button on the remote control.
The Test Pattern menu will be displayed.
When END is pressed, the Test Pattern menu will disappear.
2 User the CURSOR or button to highlight the test pattern
you wish to use and press ENTER.
The selected test pattern will be displayed.
3 To return to the original screen, press TEST and then press END.
When the TEST button is pressed, the Test Pattern menu will
be displayed and when END is pressed, the screen will be
changed to the source screen.
The projector will return to the original source screen by
pressing END only when no menu or no adjustment screen is
displayed.
TEST PATTERN
CROSS HATCH FLAT FIELD
GRAY BARS
CONTRAST CHECKER BOARD
SMALL CHECKER BOARD RAMP
3.OPERATION
BLACK FLAT FIELD