Filter
Top Products
72
3.OPERATION
Each projector needs its own unique address in the case of a serial
connection of projectors. Up to 64 addresses can be set.
Proceed as follows:
1 Use the CURSOR or button to highlight the “2/PJ Address”
line. Press ENTER to display the “Address” menu.
2 Enter the address number using the INPUT button and press
ENTER.
• If you have made a mistake, press END to return to the “OP-
TION” menu, then start again.
NOTE: Enter the address number “01” when only one projector
is used.
■ PJ Address
-Execute Mode-
1. Connect Condition
2. PJ Address
Execute Mode
Connect Condition
PJ Address
[StandAlone ]
[ 01] (01-64)