Filter
Top Products
Advanced Settings
121
D6200 WiFi DSL Modem Router
3. Click the Add Custom Service.
4. In the Name field, enter a descriptive name.
5. In the Type list, select the protocol. If you are unsure, select TCP/
UDP.
6. In the Start Port field, enter the beginning port number.
• If the application uses a single port, enter the same port number in the End Port field.
• If the application uses a range of ports, enter the ending port number of the range in
t
he End Port field.
7. Click App
l
y.
The service appears in the list in the Port Forwarding/Port T
riggering screen.
Edit or Delete a Port Forwarding Entry
To edit or delete a port forwarding entry:
1. Select ADVANCED
> Advanced Setup > Port Forwarding/Port Triggering.
2. In the table, select the radio button next to the service name.
3. Click Edit Service or
Delete Service.
Application Example: Making a Local Web Server Public
If you host a web server on your local network, you can use port forwarding to allow web
requests from anyone on the Internet to reach your web server.
To make a local web server public:
1. Assign your web server either a fixed IP address or a dynamic IP address using DHCP
address reserva
tion.
In this example, your WiFi DSL modem router always gives you
r web server an IP
address of 192.168.1.33.