Filter
Top Products
Advanced Settings
130
D6200 WiFi DSL Modem Router
• To allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• T
o allow access from a list of specific IP addresses on the Internet, select IP Address
List. Enter the IP addresses that are allowed access.
• T
o allow access from any IP address on the Internet, select Everyone.
4. S
pecify the port number for accessing the web management interface.
Normal web browser access uses the standard HTTP service port 80. For greater
securit
y, enter a custom port number for the remote web management interface. Choose
a number from 1024 through 65535, but do not use the number of any common service
port. The default is 8080, which is a common alternate for HTTP.
5. Click Apply.
6. Wh
en accessing your WiFi DSL modem router from the Internet, type your WiFi DSL
modem router’s WAN IP address into your browser’s address or location field followed by a
colon (:) and the custom port number.
For example, if your external address is 1
34.177.0.123 and you use port number 8080,
enter http://134.177.0.123:8080 in your browser.