Filter
Top Products
NETGEAR genie ADVANCED Home
52
D6200 WiFi DSL Modem Router
To change the MTU size:
1. Select ADVANCED > Setup > WAN Setup.
2. In
the MTU Size field, enter a new size from 64 through 1500.
3. Click Apply.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The WiFi DSL modem router is shipped preconfigu
red to use private IP addresses on the
LAN side and to act as a DHCP server. The WiFi DSL modem router’s default LAN IP
configuration is:
• LAN IP addre
ss. 192.168.0.1
• Subnet
mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and shou
ld be suitable for most applications. If your network requires a different IP
addressing scheme, make changes in the LAN Setup screen.
Note: If you change the LAN IP address of the WiFi DSL modem router
while connected through the browser, you are disconnected. You
have to open a new connection to the new IP address and log in
again.
1436 Used in PPTP environments or with VPN.
1400 Maximum size for AOL DSL.
576 Typical value to connect to dial-up ISPs.
Table 8. Common MTU sizes (continued)
MTU Application