Filter
Top Products
Advanced Settings
136
D6200 WiFi DSL Modem Router
Two types of VPN policies are possible:
• Manual. All set
tings (including the keys) for the VPN tunnel are input manually at each
end (both VPN endpoints). No third-party server or organization is involved.
• Auto. Some pa
rameters for the VPN tunnel are generated automatically. This process
requires using the IKE (Internet Key Exchange) protocol to perform negotiations between
the two VPN endpoints.
To manage the VPN policies:
1. Click ADVANCED > Advanc
ed Setup > VPN Policies.
The Policy Table contains the following data:
• Enable. Use this check box to e
nable or disable a policy as required. Click Apply
when you are finished.
• Name. Each policy ha
s a unique name to identify it.
• Type. The
type is Auto or Manual.
• Local. IP address
or address range on your local LAN. Traffic must be from (or to) the
addresses covered by this policy.
• Remote. IP
address or address range of the remote network. Traffic must be to (or
from) the addresses covered by this policy.
• ESP. Encaps
ulating Security Payload. This setting specifies the encryption protocol
used for the VPN data.
2. Click th
e appropriate button to manage a VPN policy:
• Edit. Edit (modify)
the selected policy. (Select a policy by selecting the radio button.)
• Delete. Delete the se
lected policy.
• Apply. Save any
changes to the Enable setting for each policy.