Filter
Top Products
153
A
A. Supplemental Information
Factory settings and technical specifications
This appendix provides factory default settings and technical specifications for the D6200 WiFi
DSL Modem Router.
Factory Settings
You can return the WiFi DSL modem router to its factory settings. Use the end of a paper clip
or some other similar object to press and hold the Reset button on the back of the router for
at least 5 seconds. The WiFi DSL modem router resets and returns to the factory settings.
Your device returns to the factory configuration settings shown in the following table.
Table 10. Factory default settings
Feature Default Behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
conne
ction
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed Autosensing
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.0.2 to 192.168.0.254
Allow a registrar to configure this
router
Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254