Filter
Top Products
Chapter 5. Network Maintenance | 53
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Restore
1. Enter the full path to the file on your network, or click the Browse button to find the file.
2. When you have located the .cfg file, click the Restore button to upload the file to the
wireless router.
Upon completion, the wireless router reboots.
Erase
Click the Erase button to reset the wireless router to its factory default settings. Erase sets
the password to password, and the LAN IP address to 192.168.1.1, and enables the wireless
router’s DHCP.
View Router Status
Select Maintenance > Router Status to display
this screen. The Router Status screen provides
status and usage information.
Hardware and Firmware Version. The model
of the hardware and the currently running
firmware version.
GUI Language Version. The currently selected
language.
Internet Port Settings
MAC Address. The Ethernet MAC address of
the DSL port.
IP Address. The DSL port IP address. If no
address is shown, the wireless router cannot
connect to the Internet.
DHCP. Usually this is set to DHCP Client
because the router obtains an IP address
dynamically from the ISP. If set to None, the
router uses a fixed IP address on the WAN.
IP Subnet Mask. The DSL port IP subnet mask.
Gateway IP Address. The IP address used as a gateway to the Internet for computers
configured to use DHCP.
Domain Name Server. The wireless router DNS server IP addresses. These addresses are
usually obtained dynamically from the ISP.