Filter
Top Products
60 | Chapter 6. USB Storage
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
• Type \\readyshare in the address field of your Web browser.
Network/device name:
Share name:
\\readyshare
\\readyshare\USB_Storage
If you logged in to the wireless router before you connected your USB device, you might not
see your USB device in the wireless router screens until you log out and then log in again.
Basic Settings Screen Fields and Buttons
• Network Device Name. The default is \\readyshare. This is the name used to access the
USB device connected to the wireless router.
• Folder Name. Full path of the network folder.
• Volume Name. Volume name from the storage device (either USB drive or HDD).
• Total/Free Space. Shows the current utilization of the storage device.
• Share Name. You can click the name shown, or you can type it in the address field of
your Web browser.
If Not Shared is shown, then the default share has been deleted and no other share for
the root folder exists. Click the link to change this setting.
• Read/Write Access. Shows the network folder permissions and access controls.
- All no password allows all users to access the network folder.
- admin uses the same password that you use to log in to the wireless router.
• Edit. You can click the Edit button to edit the Available Network folder settings. See the
following section, Edit a Network Folder .
• Safely Remove USB Device. Click this button to safely remove the USB device attached
to your wireless router. See Unmount a USB Drive on page 63.
Edit a Network Folder
This process is the same from both the USB Storage (Basic Settings) and (Advanced
Settings) screens.