18 Installing Your Router Manually (Advanced, Mac, and Linux Users)
To start your network:
1.
Plug in and turn on the cable or DSL modem. Wait 2 minutes.
2. Plug the power cord into your wireless router and into a power outlet. Wait 1 minute.
3. Turn on your computer. It will take several minutes for your router to establish a connection
with your computer and your Internet provider.
Verifying Your Connection
Verify that your router is connected correctly by checking the wireless router status lights (as
illustrated in Figure 10).
For DSL customers, if software logs you in to the Internet, do not run that
software. You may need to go to the Internet Explorer Tools menu, Internet
Options, Connections tab and select “Never dial a connection.”
Figure 10
• Power. The power light should turn solid green. If it does not, see
“Checking Basic Router Functions” on page 28.
• Wireless. The wireless light should be lit after turning on the
router.
• Internet. The Internet port light should be lit. If it is not, make sure
the Ethernet cable is securely attached to the wireless router Internet
port and the modem, and that the modem is powered on.
• LAN. A LAN light should be lit for each connected computer on
your network. Green indicates that your computer is communicating at
100 Mbps; amber indicates communication at 10 Mbps. If a LAN light is
not lit for each connected Ethernet cable, make sure that the Ethernet
cable from the computer to the router is securely attached at both ends,
and that the computer is turned on.