Filter
Top Products
Installing Your Router Manually (Advanced, Mac, and Linux Users) 19
Setting Up Your Router for Internet Access
When configuring your wireless router manually, you must log in to your wireless router to set it
up initially and to make any changes to your wireless router’s settings later.
To access the router using its login name and password:
1.
Type http://www.routerlogin.net in the address field of your browser, and then click Enter.
A login window similar to the one shown in Figure 11 will display.
2. When prompted, enter admin for the router User Name and password for the router
Password, both in lowercase letters. (For security reasons, the router has its own user name
and password.)
The Main menu will display.
The factory default state is reset when you use the Restore Factory Settings button.
See “Restoring the Default User Name and Password” on page 36 for more
information.
You can enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
Figure 11
The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.