Filter
Top Products
2-102 Command Line Interface Commands Reference
The tag (i.e., name) of the DLCI defaults, in this case, to “DLCI 17”. To specify a different name, type:
frame-relay dlci 17 tag "My DLCI"
For descriptions of the other parameters available for configuration (and their default values) see the Motorola
Netopia
®
Router User’s Reference Guide.
no frame-relay dlci number
This command deletes the DLCI identified by number.
frame-relay lmi type { none | annexa | annexd | ansi | ccitt | lmi }
no frame-relay lmi type
show frame-relay lmi type
These commands allow you to change or display the Frame Relay Local Management Interface (LMI) type. The
keywords ccitt and annexa are synonyms, as are the keywords ansi and annexd.
frame-relay tim { none | standard | buffered }
This command allows you to set the routers’s Frame Relay transmit injection management tim.
show frame-relay lmi statistics
This command displays Frame Relay Local Management Interface (LMI) statistics.
Example:
#show frame-relay lmi statistics
LMI Tx Status Enquiries: 10
LMI Rx Status Responses: 10
LMI Timeouts: 0
LMI Errors: 0
LMI Failures: 0
show frame-relay pvc
This command displays the status of each Frame Relay permanent virtual circuit (pvc).
Example:
#show frame-relay pvc
DLCI: 16, status: active
DLCI: 17, status: active