Filter
Top Products
Motorola Netopia® Router CLI Commands 2-51
SDSL WAN Interface configuration commands
interface sdsl id clock source { internal | network }
show interface sdsl id clock source
These commands allow you to set, change, or show the clock source associated with the SDSL WAN interface.
Note: These commands apply only to frame-based SDSL (R7100) interfaces.
SDSL WAN Interface Configuration Commands
interface sdsl id clock source { internal | network }
show interface sdsl id clock source
interface sdsl id clock rate rate-specification
show interface sdsl id clock rate
interface sdsl id operation mode { generic | lucent | nokia-eoc-fast | nokia-fixed | paradyne |
nortel | newbridge } [ default ]
show interface sdsl id operation mode
interface sdsl id pvc vpi-value vci-value
show interface sdsl id pvc
interface sdsl id region { annexa | annexb }
show interface sdsl id region
interface { sdsl | isdn } id rfc1973 dlci { 16 .. 991 }
show interface { sdsl | isdn } id rfc1973 dlci
interface { sdsl | isdn } id rfc1973 enable { yes | no }
no interface ethernet { sdsl | isdn } id rfc1973 enable
show interface { sdsl | isdn } id rfc1973 enable
interface { sdsl | isdn } id rfc1973 lmi { none | lmi | ccitt | ansi | annexa | annexd }
no interface { sdsl | isdn } id rfc1973 lmi
show interface { sdsl | isdn } id rfc1973 lmi
show interface sdsl id status