Filter
Top Products
2-48 Command Line Interface Commands Reference
auto is appropriate only in the United States and allows the router to auto-determine the switch type, SPIDs,
and directory numbers (DNs).
uk-euro sets the switch type to Euro-ISDN, and as a side effect sets the console’s clock time display type to 24
hour (i.e., “17:45” instead of “5:45 PM”).
Example:
The command to set the switch type of the wanlet for the correct value in Japan is:
interface isdn 1 switch japanntt
interface isdn id dn { 1 | 2 } string
no interface isdn id dn { 1 | 2 }
show interface isdn id dn { 1 | 2 }
These commands allow you to set, change, delete, or show the directory numbers associated with the specified
ISDN interface. These commands apply only to switched ISDN. The only currently supported id is 1. The string
parameter can contain up to 32 characters. Non-dialable characters are allowed (and are ignored).
Example:
interface isdn 1 dn 1234567
interface isdn id spid { 1 | 2 } string
no interface isdn id spid { 1 | 2 }
show interface isdn id spid { 1 | 2 }
These commands allow you to set, change, delete, or show the SPIDs associated with the specified ISDN
interface. These commands apply only to switched ISDN. The only currently supported id is 1. The string
parameter can contain up to 23 characters. Illegal characters are allowed (for instance, for formatting) and are
ignored by the interface.