Filter
Top Products
Motorola Netopia® Router CLI Commands 2-113
show ip nat translation
This command displays the current sessions passing through network address translation.
Example:
Beginning with Firmware Version 8.3.3, the session lifetime in hours:minutes format is displayed. Indefinitely
long sessions greater than 10 hours, are shown as ">10h".
#show ip nat translations
LAN IP address--Port--WAN IP address--Port--Rem IP Address--Port--Dir-Prot-h:mm
10.1.32.127:57037 10.1.32.127:57037 204.152.184.72:123 out UDP 0:01
192.168.1.100:4956 10.1.32.127:49161 10.1.32.250:10 out UDP 0:02
192.168.1.100: 10.1.32.127: 10.1.32.45: out ICMP 8s
10.1.32.127:23 10.1.32.127:23 10.1.32.250:1585 in TCP >10h
Total entries in NAT cache: 4