Filter
Top Products
2-70 Command Line Interface Commands Reference
IGMP Configuration Commands
Note: These commands are supported beginning with Firmware Version 8.5.1. IGMP Version 3 is supported
beginning with Firmware Version 8.7.
igmp version ( v1 | v2 | v3 )
show igmp version
These commands allow you to set or show the querier's (LAN's) maximum IGMP version that will be used.
IGMP Configuration Commands
igmp version ( v1 | v2 | v3 )
show igmp version
igmp snooping [ yes | no ]
no igmp snooping
show igmp snooping
igmp robustness value
no igmp robustness
show igmp robustness
igmp query-intvl value
no query-intvl
show query-intvl
igmp query-response-intvl value
no query-response-intvl
show query-response-intvl
igmp last-member-query-intvl value
show igmp last-member-query-intvl
igmp last-member-query-count value
show igmp last-member-query-count
igmp fast-leave [ yes | no ]
no igmp fast-leave
show igmp fast-leave
show igmp group
igmp wireless-m2u [ on | off ]