Filter
Top Products
Multiple Network Address Translation and IP Setup 10-21
The Default Answer Profile screen appears.
If Must Match a Defined Profile is set to Yes, then the NAT attributes of the Connection Profile take
precedence. If you toggle Must Match a Defined Profile to No, IP-related menu options become visible.
■ Select IP Parameters and press Return. The IP Parameters (Default Answer Profile) screen appears.
You can then bind NAT Map Lists and NAT Server Lists in the same fashion as described in the section “IP
profile parameters” on page 10-18.
Default Answer Profile
Must Match a Defined Profile: No
IP Enabled: Yes
IP Parameters...
IPX Enabled: No
Data Compression... Standard LZS
Max. Receive Packet Size: 1500
Idle Timeout: 300
Return/Enter accepts * Tab toggles * ESC cancels.
Configure values which may be used when receiving a call in this screen.
IP Parameters (Default Answer Profile)
Filter Set (Firewall)...
Remove Filter Set
Address Translation Enabled: Yes
Interface IP Address: 0.0.0.0
NAT Map List...
NAT Server List...
Receive RIP: Both
Transmit RIP: Off
Return/Enter to select a Firewall Filter Set for incoming calls.
Configure IP values to use when no matching Profile can be found.