Filter
Top Products
7-10 User’s Reference Guide
To access the System Configuration screens, select System Configuration in the Main Menu, then press
Return.
The System Configuration Menu screen appears:
Network Protocols Setup
These screens allow you to configure your network’s use of the standard networking protocols:
■ IP: details are given in “Multiple Network Address Translation and IP Setup” on page 10-1.
■ IPX: details are given in “IPX Setup” on page 11-1.
■ AppleTalk: details are given in “AppleTalk Setup” on page 12-1.
Note: AppleTalk requires the optional AppleTalk feature expansion kit.
Filter Sets (Firewalls)
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
■ Details are given in “Security” on page 14-1.
Physical Layer Telco Parameters Dial is set to: Dial In/Out
Dial On Demand is set to: Yes
Callback is set to: No
Idle Time-out is set for: 300 seconds
Layer Category Parameter Type Options Default settings
System Configuration
Network Protocols Setup...
Filter Sets (Firewalls)...
IP Address Serving...
Date and Time...
Console Configuration...
SNMP (Simple Network Management Protocol)...
Security...
Upgrade Feature Set...
Logging...
Return/Enter to configure Networking Protocols (such as TCP/IP).
Use this screen if you want options beyond Easy Setup.