Filter
Top Products
WAN and System Configuration 7-7
Deleting connection profiles
You can delete a connection profile by returning to the WAN Configuration menu and selecting Delete
Connection Profile.
A scrolling pop-up screen appears. Select the profile you want to delete and press Return. When prompted,
select CONTINUE, and the connection profile will be deleted.
System Configuration screens
You can connect to the Netopia R2020’s System Configuration screens:
■ Using Telnet with the Router’s Ethernet port IP address
■ Through the console port, using a local terminal (see “Connecting a local terminal console cable to your
router” on page 5-3)
You can also retrieve the Netopia R2020’s configuration information and remotely set its parameters using the
Simple Network Management Protocol (see “SNMP” on page 13-12).
Open a Telnet connection to the IP address you set in the router with SmartStart, for example “192.168.1.1.”
WAN Configuration
+-Profile Name---------------------IP Address----IPX Network-+
+------------------------------------------------------------+
| Easy Setup Profile 127.0.0.2 |
| Profile 02 0.0.0.0 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+------------------------------------------------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Delete.