Filter
Top Products
Managing Data Calls 8-3
the line, but uses a different telephone number and ring pattern. Supported options are:
■ You can choose when the Netopia R2020’s modem connection tones are audible. Supported options are:
■ You can specify how to use the auxiliary serial port on the Netopia R2020’s back panel. By default, this
port is enabled for an external asynchronous modem. If you have installed the optional AppleTalk feature
set, then this port defaults to a LocalTalk connection. See “AppleTalk Setup” on page 12-1 for more
information on how to use the optional AppleTalk feature set.
Netopia R2020 back panel
Ring Type: Description:
Any (the default) any pattern
Ring A 2.0 sec ON, 4.0 sec OFF (normal North American ring pattern)
Ring B 0.8 sec ON, 0.4 sec OFF, 0.8 sec ON, 4.0 sec OFF
Ring C 0.4 sec ON, 0.2 sec OFF, 0.4 sec ON, 0.2 sec OFF, 0.8 sec ON, 4.0 sec
OFF
Never the line will not answer to any ring pattern
Selection: Behavior:
Never Turns off all speaker activity and hides the Speaker Volume control.
Until Carrier The default. Allows call placement and handshaking tones to be heard.
During
Answer
Same as above, but blocks dialing tones.
Always Allows carrier tones to be heard, as well.
Auxiliary serial port
HD-15 (female)
8
Ethernet
Normal/Uplink
Auxiliary Console Power
4
7
3
6
2
5
1
Line 2 Line 1
1