Filter
Top Products
2-2 User’s Reference Guide
Windows and Macintosh, ZTerm terminal emulator software and NCSA Telnet 2.6 for Macintosh
You will need:
■ A Windows 95-based PC or a Macintosh with Ethernet connectivity for configuring the Netopia R2020. This
may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See “Before running
SmartStart” on page 3-1.
■ Two telephone lines, each with its own jack.
Identify the connectors and attach the cables
Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
1. Connect the mini-DIN8 connector from the Power Adapter to the Power port, and plug the other end into an
electrical outlet.
2. Connect one end of one of the RJ-11 cables to the “Line 1" port, and the other end to one of your wall
outlets.
Auxiliary
Console
Power
Line 1
Line 2
Normal Uplink
Ethernet
1
8
2 Telco
3
1 Ethernet
Power