Filter
Top Products
7-12 User’s Reference Guide
To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.
Follow these steps to change a parameter’s value:
1. Select the parameter you want to change.
2. Select a new value for the parameter. Return to step 1 if you want to configure another parameter.
3. Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameters
unchanged and exit the Console Configuration screen.
SNMP (Simple Network Management Protocol)
These screens allow you to monitor and configure your network by means of a standard Simple Network
Management Protocol (SNMP) agent.
■ Details are given in “SNMP” on page 13-12.
Security
These screens allow you to add users and define passwords on your network.
■ Details are given in “Security” on page 14-1.
Upgrade Feature Set
You can upgrade your Netopia R2020 by adding new feature sets through the Upgrade Feature Set utility.
See the release notes that came with your router or feature set upgrade or visit the Netopia web site at
www.netopia.com for information on new feature sets, how to obtain them, and how to install them on your
Netopia R2020.
Console Configuration
Baud Rate... 57600
Hardware Flow Control: Yes
SET CONFIG NOW CANCEL