Filter
Top Products
146
COOLSCAN IV ED (LS-40 ED)
Film •35mm film: Positive and negative film, both color and
monochrome, may be used. Film may be
scanned in strips of up to six frames or
mounted as 35 mm slides using mounts of
from 1.0 to 3.2 mm in thickness and 49.0–
50.8 mm in width.
•APS (IX240) film:
APS film cartridges can be scanned with the
optional IA-20 (S) adapter for APS (IX240) film.
•Prepared slides: Prepared slides can be scanned using the op-
tional FH-G1 slide holder for the MA-20 (S).
Aperture 25.1 × 36.8 mm when scanning 35 mm film in the MA-20 (S) or
FH-3 (S)
25.1 × 38.0 mm when scanning 35 mm film in the SA-21
18.6 × 28.4 mm when scanning APS (IX240) film
Scan range 2870 × 4203 pixels when scanning 35 mm film in the MA-20 (S)
or FH-3 (S)
2870 × 4332 pixels when scanning 35 mm film in the SA-21
2120 × 3237 pixels when scanning APS (IX240) film
Effective aperture 23.3 × 36.0 mm when scanning 35 mm film in the SA-21
24.0 × 36.0 mm when scanning 35 mm film in the FH-3 (S)
25.1 × 36.8 mm when scanning 35 mm film in the MA-20 (S)
16.1 × 26.9 mm when scanning APS (IX240) film
Effective scan range 2657 × 4104 pixels when scanning 35 mm film in the SA-21
2736 × 4104 pixels when scanning 35 mm film in the FH-3 (S)
2870 × 4203 pixels when scanning 35 mm film in the MA-20 (S)
1836 × 3067 pixels when scanning APS (IX240) film
Scanning system Fixed-film, movable-plane single-pass optical scanning system
Light source Red, green, and blue (RGB) LEDs
Sensor 2870-pixel, linear CCD image sensor
Color separation Performed by RGB color LEDs
Optical resolution Maximum 2900 pixels per inch
Analog-to-digital (A/D)
conversion 12 bits per color (RGB)
Output Full color (8 or 16 bits per color [RGB])
Focus Autofocus, Manual