Filter
Top Products
4000 ED
53
Confirming Device Registration (Windows 98 SE)
After registering the scanner, confirm that the device is working normally as described below.
1
Turn the scanner on
Make sure that the scanner is connected and turned on.
2
Open the System Properties dialog
From the Start menu, select Settings > Control Panel and double-click the System
icon.
3
Display the Device Manager
The System Properties dialog will be dis-
played. Open the Device Manager tab.
4
Confirm that the scanner is listed under “Imaging Device”
If “Imaging Device” appears in the Device
Manager, click the “+” to its left to view
the imaging devices currently registered
with Windows. Confirm that your scan-
ner is listed.
If the Scanner Is Not Listed
If your scanner is not listed under “Imag-
ing Device,” proceed to “Updating the
Device Driver (Windows 98 SE)” ( 55).