Filter
Top Products
En
16
Installing Nikon Scan
Before you can connect your scanner to your computer, you will need to install Nikon Scan 3
driver software for your scanner. The procedure for installing Nikon Scan 3 on Windows com-
puters differs from the install procedure for Macintosh computers.
The Nikon Scan 3 install CD includes two versions of Nikon Scan 3: version 3.1.2 (for Windows
and Mac OS 9 or earlier) and version 3.1.3 (for Mac OS X version 10.1.3 or later).
Nikon Scan 3 Version 3.1.2
This version of Nikon Scan will be installed under Windows and Mac OS 9 or earlier.
Nikon Scan 3 Version 3.1.3
This version of Nikon Scan 3 is supported only under Mac OS X (version 10.1.3 or later). It will
be installed on Macintosh computers running Mac OS X. The following limitations apply:
• The LS-2000 and COOLSCAN III are not supported.
• The menus and dialogs shown in the Nikon Scan 3 Help file are for version 3.1.2.
Installing Nikon Scan under Windows
Before installing Nikon Scan, turn your computer on and wait for Windows to start up. Check
to make sure that:
• The scanner is not connected to your computer
•Your computer satisfies the Nikon Scan 3 system requirements (see page 5 of the
Nikon Scan Reference Manual for details)
• No other applications (including anti-virus software) are running
•You have completed the IEEE 1394 update (Windows 98 SE with SUPER COOLSCAN
4000 ED only; see page 17 for details)