Filter
Top Products
Alteon OS Command Reference
116
Chapter 4: The Information Menu 40M2420, April 2007
/info/link
Link Status Information
NOTE – The sample screens that appear in this document might differ slightly from the screens
displayed by your system. Screen content varies based on the type of BladeCenter unit that you
are using and the firmware versions and options that are installed.
Use this command to display link status information about each port on an
GbE Switch Module
slot, including:
Port alias
Port speed (10, 100, 1000, or any)
Duplex mode (half, full, any, or auto)
Flow control for transmit and receive (no, yes, or auto)
Link status (up, down, or disabled)
Alias Port Speed Duplex Flow Ctrl Link
---- ----- ----- -------- --TX-----RX-- ------
INT1 1 1000 full yes yes up
INT2 2 1000 full yes yes up
INT3 3 1000 full yes yes up
INT4 4 1000 full yes yes up
INT5 5 1000 full yes yes down
INT6 6 1000 full yes yes up
INT7 7 1000 full yes yes up
INT8 8 1000 full yes yes up
INT9 9 1000 full yes yes up
INT10 10 1000 full yes yes up
INT11 11 1000 full yes yes up
INT12 12 1000 full yes yes up
INT13 13 1000 full yes yes up
INT14 14 1000 full yes yes up
MGT1 15 100 full yes yes up
MGT2 16 100 full yes yes up
EXT1 17 1000 any yes yes up
EXT2 18 1000 any yes yes up
EXT3 19 1000 any yes yes up
EXT4 20 1000 any yes yes up
EXT5 21 1000 any yes yes up
EXT6 22 1000 any yes yes up