Filter
Top Products
Alteon OS Command Reference
290
Chapter 6: The Configuration Menu 40M2420, April 2007
/cfg/l3/igmp/mrouter
IGMP Static Multicast Router Configuration
Table 6-89 describes the commands used to configure a static multicast router.
NOTE – When you configure a static multicast router on a VLAN, the process of learning mul-
ticast routers is disabled for that VLAN.
ena
Enables the multicast router.
dis
Disables the multicast router.
del
Deletes the multicast router from IGMP Relay.
cur
Displays the current IGMP Relay multicast router parameters.
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
cur - Display current Multicast Router configuration
Table 6-89 IGMP Static Multicast Router Menu Options (/cfg/l3/igmp/mrouter)
Command Syntax and Usage
add <port number> <VLAN number> <IGMP version number>
Selects a port/VLAN combination on which the static multicast router is connected, and configures
the IGMP version (1, 2, or 3) of the multicast router.
remove <port number> <VLAN number> <IGMP version number>
Removes a static multicast router from the selected port/VLAN combination.
cur
Displays the current IGMP Static Multicast Router parameters.
Table 6-88 IGMP Relay Mrouter Menu Options (/cfg/l3/igmp/relay/mrtr)
Command Syntax and Usage