Filter
Top Products
Alteon OS Command Reference
Chapter 6: The Configuration Menu
20140M2420, April 2007
cfg/sys/access
System Access Configuration
[System Access Menu]
mgmt - Management Network Definition Menu
user - User Access Control Menu (passwords)
http - Enable/disable HTTP (Web) access
https - HTTPS Web Access Menu
wport - Set HTTP (Web) server port number
snmp - Set SNMP access control
userbbi - Enable/disable user configuration from BBI
tsbbi - Enable/disable telnet/ssh configuration from BBI
tnet - Enable/disable Telnet access
tnport - Set Telnet server port number
tport - Set the TFTP port for the system
cur - Display current system access configuration
Table 6-19 System Access Menu Options (/cfg/sys/access)
Command Syntax and Usage
mgmt
Displays the Management Configuration Menu. To view menu options, see page 203.
user
Displays the User Access Control Menu. To view menu options, see page 204.
http disable|enable
Enables or disables HTTP (Web) access to the Browser-Based Interface. It is enabled by default.
https
Displays the HTTPS Menu. To view menu options, see page 207.
wport <TCP port number (1-65535)>
Sets the switch port used for serving switch Web content. The default is HTTP port 80. If Global
Server Load Balancing is to be used, set this to a different port (such as 8080).
snmp disable|read-only|read-write
Disables or provides read-only/write-read SNMP access.
userbbi enable|disable
Enables or disables user configuration access through the Browser-Based Interface (BBI).
tsbbi enable|disable
Enables or disables Telnet/SSH configuration access through the Browser-Based Interface (BBI).
You see this command only if you are connected to the switch through a serial connection.
tnet enable|disable
Enables or disables Telnet access. This command is enabled by default. You see this command
only if you are connected to the switch through a serial connection.