Filter
Top Products
Alteon OS Command Reference
268
Chapter 6: The Configuration Menu 40M2420, April 2007
trigg disable|enable
Enables or disables Triggered Updates. Triggered Updates are used to speed convergence. When
enabled, Triggered Updates force a router to send update messages immediately, even if it is not
yet time for the update message. The default setting is enabled.
mcast disable|enable
Enables or disables multicast updates of the routing table (using address 224.0.0.9). The default
setting is enabled.
default none|listen|supply|both
Configures the default route action. The default setting is none.
metric <1-15>
Configures the route metric, which indicates the relative distance to the destination. The default
value is 1.
auth none|password
Configures the authentication type. The default is none.
key
Configures the authentication key password.
enable
Enables this RIP interface.
disable
Disables this RIP interface.
current
Displays the current RIP configuration.
Table 6-71 RIP Interface Menu Options (/cfg/l3/rip/if)
Command Syntax and Usage