Filter
Top Products
Alteon OS Command Reference
Chapter 6: The Configuration Menu
31340M2420, April 2007
/cfg/acl/acl <ACL number>/ipv4
IP version 4 Filtering Configuration
This menu allows you to define IPv4 matching criteria for an ACL.
[Filtering IPv4 Menu]
sip - Set to filter on source IP address
dip - Set to filter on destination IP address
proto - Set to filter on prototype
tos - Set to filter on TOS
reset - Reset all fields
cur - Display current parameters
Table 6-109 IP version 4 Filtering Menu Options (/cfg/acl/acl x/ipv4)
Command Syntax and Usage
sip <IP address> <mask (such as 255.255.255.0)>
Defines a source IP address for the ACL. If defined, traffic with this source IP address will match
this ACL. Specify an IP address in dotted decimal notation.
dip <IP address> <mask (such as 255.255.255.0)>
Defines a destination IP address for the ACL. If defined, traffic with this destination IP address
will match this ACL.
proto <0-255>
Defines an IP protocol for the ACL. If defined, traffic from the specified protocol matches this fil-
ter. Specify the protocol number. Listed below are some of the well-known protocols.
Number
Name
1 icmp
2 igmp
6 tcp
17 udp
89 ospf
112 vrrp
tos <0-255>
Defines a Type of Service value for the ACL. For more information on ToS, refer to RFC 1340 and
1349.
reset
Resets the IPv4 parameters for the ACL to their default values.
cur
Displays the current IPV4 parameters.