Alteon OS Command Reference
334
Chapter 8: The Boot Options Menu 40M2420, April 2007
Selecting a Software Image to Run
You can select which software image (image1 or image2) you want to run in switch mem-
ory for the next reboot.
1. At the Boot Options# prompt, enter:
2. Enter the name of the image you want the switch to use upon the next boot.
The system informs you of which image is currently set to be loaded at the next reset, and
prompts you to enter a new choice:
Boot Options# image
Currently set to use switch software "image1" on next reset.
Specify new image to use on next reset ["image1"/"image2"]: