Filter
Top Products
Alteon OS Command Reference
320
Chapter 6: The Configuration Menu 40M2420, April 2007
/cfg/setup
Setup
The setup program steps you through configuring the system date and time, BOOTP, IP, Span-
ning Tree, port speed/mode, VLAN parameters, and IP interfaces.
To start the setup program, at the Configuration# prompt, enter:
For a complete description of how to use setup, see Chapter 2, “First-Time Configuration.”
/cfg/dump
Dump
The dump program writes the current switch configuration to the terminal screen. To start the
dump program, at the Configuration# prompt, enter:
The configuration is displayed with parameters that have been changed from the default val-
ues. The screen display can be captured, edited, and placed in a script file, which can be used to
configure other switches through a Telnet connection. When using Telnet to configure a new
switch, paste the configuration commands from the script file at the command line prompt of
the switch. The active configuration can also be saved or loaded via TFTP, as described on
page 321.
Configuration# setup
Configuration# dump