Filter
Top Products
Alteon OS Command Reference
212
Chapter 6: The Configuration Menu 40M2420, April 2007
/cfg/port <port alias or number> aclqos/meter <meter
number>
ACL Port Metering Menu
This menu defines the Access Control profile for the selected ACL group on the port.
[Metering Menu]
cir - Set committed rate in KiloBits/s
mbsize - Set maximum burst size in KiloBits
enable - Enable/disable port metering
dpass - Set to Drop or Pass out of profile traffic
assign - Assign meter to ACL, ACL block or ACL group
unassign - Unassign meter from ACL, ACL block or ACL group
reset - Reset meter parameters
cur - Display current settings
Table 6-28 ACL Metering Menu Options (/cfg/port/aclqos/meter)
Command Syntax and Usage
cir <64-1000000>
Configures the committed rate, in Kilobits per second. The committed rate must be a multiple
of 64.
mbsize <32-4096>
Configures the maximum burst size, in Kilobits. Enter one of the following values for
mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
enable e|d
Enables or disables ACL Metering on the port.
dpass drop|pass
Configures the ACL Meter to either drop or pass out-of-profile traffic.
assign acl|blk|grp <1-4096>
Adds an ACL, ACL Block, or ACL Group to the ACL Meter on this port.
unassign acl|blk|grp <1-4096>
Removes an ACL, ACL Block, or ACL Group from the ACL Meter on this port.
reset
Reset ACL Metering parameters to their default values.
cur
Displays current ACL Metering parameters.