Filter
Top Products
Alteon OS Command Reference
210
Chapter 6: The Configuration Menu 40M2420, April 2007
/cfg/port <port alias or number> gig
Port Link Configuration
Use these menu options to set port parameters for the port link.
Link menu options are described in Table 6-26 and appear on the gig port configuration menu
for the
GbE Switch Module. Use this menu to set port parameters such as speed, flow control,
and negotiation mode for the port link.
[Gigabit Link Menu]
speed - Set link speed
mode - Set full or half duplex mode
fctl - Set flow control
auto - Set auto negotiation
cur - Display current gig link configuration
Table 6-26 Port Link Configuration Menu Options (/cfg/port/gig)
Command Syntax and Usage
speed 10|100|1000|any
Sets the link speed. Some options are not valid on all ports. The choices include:
10 Mbps
100 Mbps
1000 Mbps
“Auto,” for auto negotiation
mode full|half|any
Sets the operating mode. The choices include:
“Any,” for auto negotiation (default)
Full-duplex
Half-duplex
fctl rx|tx|both|none
Sets the flow control. The choices include:
Receive flow control
Transmit flow control
Both receive and transmit flow control (default)
No flow control
auto on|off
Enables or disables auto negotiation for the port.
cur
Displays current port parameters.