Filter
Top Products
Alteon OS Command Reference
Chapter 6: The Configuration Menu
21140M2420, April 2007
Temporarily Disabling a Port
To temporarily disable a port without changing its stored configuration attributes, enter the fol-
lowing command at any prompt:
Because this configuration sets a temporary state for the port, you do not need to use apply or
save. The port state will revert to its original configuration when the
GbE Switch Module is
reset. See the “Operations Menu” on page 324 for other operations-level commands.
/cfg/port <port alias or number> aclqos
Port ACL Configuration
Main# /oper/port <port alias or number>/dis
[Port INT2 ACL Menu]
meter - ACL Metering Configuration Menu
re-mark - ACL Re-mark Configuration Menu
add - Add ACL, ACL block or ACL group to this port
rem - Remove ACL, ACL block or ACL group from this port
cur - Display current ACLs for this port
Table 6-27 Port ACL Menu Options (/cfg/port/aclqos)
Command Syntax and Usage
meter <meter number, 1-127>
Displays the Metering Menu. To view menu options, see page 212.
re-mark <re-mark number, 1-127>
Displays the Re-Mark Menu. To view menu options, see page 213.
add acl|blk|grp <1-4096>
Adds the specified ACL, ACL Block, or ACL Group to the port. You can add multiple ACL
Groups to a port, but the total number of precedence levels allowed is eight.
rem acl|blk|grp <1-4096>
Removes the specified ACL, ACL Block, or ACL Group from the port.
cur
Displays current ACL QoS parameters.