Filter
Top Products
Alteon OS Command Reference
Chapter 1: The Command Line Interface
2540M2420, April 2007
Running SSH
Once the IP parameters are configured and the SSH service is turned on the GbE Switch Module,
you can access the command line interface using an SSH connection. The default setting for
SSH access is disabled.
To establish an SSH connection with the switch, run the SSH program on your workstation by
issuing the SSH command, followed by the switch IP address:
or, if SecurID authentication is required, use the following command:
You will then be prompted to enter your user name and password.
>> # ssh <switch IP address>
>> # ssh -1 ace <switch IP address>