Filter
Top Products
Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1
100
3.5.12 Client Page
Client
page layout
The Client page is used for dialling-in to a VPN server.
Connection Select from the list the name of the connection you want to start.
Local ID The local ID identifies the local SpeedTouch™ during the Phase 1 negotiation with
the remote Security Gateway. This identity must match the settings in the remote
Security Gateway in order to successfully set up the IKE Security Association. The
Local ID types supported in the SpeedTouch™ are listed in the following table.
Configuring XAuth When you use the Extended Authentication protocol on the connection, you fill out
an XAuth Username and Password in the optional fields.
The configuration of a VPN client scenario is described in detail in section
“3.2 VPN Client” on page 51 and following. The application-oriented VPN
Client Web page is the recommended way to configure a VPN client and
allows you to dial in to the VPN server.
Local ID type Keyword Examples
Use the values of the peer
profile
as_per_peer_profile
User fully qualified domain
name
userfqdn john.doe@corporate.net
Fully qualified domain name fqdn sales.corporate.net
Key identity keyid cisid
The XAuth Password is not shown in clear text. In order to protect from
typing errors, you have to confirm your entry.
The use of XAuth is further explained in section “6.3 Extended
Authentication (XAuth)” on page 176 and following.