Filter
Top Products
Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1
127
4.5 Connection Security Descriptor
What is ... All security parameters required to establish an IPSec tunnel are grouped into a
string called Connection Security Descriptor. This descriptor contains the following
parameters:
Encryption method
Message integrity method (also called message authentication)
Selection to use Perfect Forward Secrecy, or not
Lifetime of the Security Association
Encapsulation method.
The Connection Security Descriptor parameters are explained in section 4.5.1.
How is it used A Connection Security Descriptor is required as one of the parameters to
successfully create an operational Connection. The Connection refers to the
Connection Security Descriptor by its symbolic name.
A number of Peer Security Descriptors are pre-configured in the SpeedTouch™. The
user can modify these descriptors, or define additional descriptors to fit his
requirements.
In this section The following topics are discussed in this section:
Topic Page
4.5.1 Connection Security Descriptor parameters 128
4.5.2 List all Connection Security Descriptors 131
4.5.3 Create a new Connection Security Descriptor 132
4.5.4 Set the Connection Security Descriptor Parameters 133
4.5.5 Delete a Connection Security Descriptor 134