Filter
Top Products
Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1
79
Local ID The Local ID identifies the local SpeedTouch™ during the Phase 1 negotiation with
the remote Security Gateway. This identity must match the settings in the remote
Security Gateway in order to successfully set up the IKE Security Association. The
Local ID types supported in the SpeedTouch™ are listed in the following table.
Remote ID The Remote ID identifies the remote Security Gateway during the Phase 1
negotiation. This identity must match the settings in the remote Security Gateway in
order to successfully set up the IKE Security Association. The Remote ID types
supported in the SpeedTouch™ are listed in the following table.
Local ID type Keyword Examples
IP address addr 10.0.0.1
Fully qualified domain name fqdn sales.corporate.net
User fully qualified domain
name
userfqdn john.doe@corporate.net
Distinguished name dn dc=corpor,uid=user
Key identity keyid cisid
any any
For a VPN client/server connection between a SpeedTouch™ VPN client and
a Cisco IOS VPN server, select keyid as Local ID type. As Local ID value you
type the user group name used in the Cisco configuration.
Remote ID type Keyword Examples
IP address addr 10.0.0.1
Fully qualified domain name fqdn sales.corporate.net
User fully qualified domain
name
userfqdn john.doe@corporate.net
Distinguished name dn dc=corpor,uid=user
Key identity keyid cisid
any any