Filter
Top Products
Chapter 6
Advanced Features
E-DOC-CTC-20051017-0169 v0.1
186
6.5.3 Set or modify the vpnserver parameters
modify command The ipsec peer vpnserver modify command sets or modifies the
vpnserver entity parameters.
Example In this example, the parameters of the previously defined vpnserver entity, named
serv1, are set:
Use the
list command to verify the results of the operation:
[ipsec peer vpnserver]=>modify
name = serv1
[push_ip] =
disabled enabled
[push_ip] = disabled
[iprange] = 10.60.11.0/24
[netmask] = 255.255.255.0
[primdns] = 10.60.11.200
[secdns] = 10.60.11.201
[primwins] = 10.60.11.100
[secwins] = 10.60.11.101
[domain] = clients
[xauthpool] =
:ipsec peer vpnserver modify name=serv1 push_ip=disabled iprange=10.60.
11.0/
24 netmask=24 primdns=10.60.11.200 secdns=10.60.11.201 primwins=10.60.1
1.100 secwins=10.60.11.101 domain=clients
[ipsec peer vpnserver]=>
[ipsec peer vpnserver]=>list
[serv1]
Push IP : disabled
Address Range : 10.60.11.0/24
Netmask : 255.255.255.0
Primary DNS : 10.60.11.200
Secondary DNS : 10.60.11.201
Primary WINS : 10.60.11.100
Secondary WINS: 10.60.11.101
Domain : clients
XAuth Pool : <unset>
[ipsec peer vpnserver]=>